What are the main sources of non-metallic inclusions in steel?
endogenous inclusions. It refers to the oxide formed by oxidation of elements during smelting, the deoxidation product formed during deoxidation, and the compound which is not melted in steel due to temperature drop and composition segregation during solidification.
How to deal with molten steel under the tapping process?
How to ensure the molten steel composition during the tapping process after the end point?
Is it correct to add more deoxidizer to molten steel, and the less oxygen in the steel must be? why?
Why is [Si] commonly used in blast furnace production to indicate furnace temperature?
Whether Si is reduced from liquid or gaseous, high temperatures are required. The higher the temperature of the hearth, the more Si is reduced into pig iron.
How does the iron-carbon equilibrium phase diagram be applied in the rolling process?
According to the iron-carbon equilibrium phase diagram, the heating temperature range, the rolling temperature range and the final rolling temperature range of each steel type can be determined.
Hot Products
ASTM A312 Seamless Stainless Steel Pipe
Oil & Gas Line Pipe
ASTM A252 Piling Pipe
Oil & Gas Pipeline
![Why is [Si] commonly used in blast furnace production to indicate furnace temperature?](https://www.tjxysteel.com/data/upload/20181012/5bbffe24022b4.jpg "Why is [Si] commonly used in blast furnace production to indicate furnace temperature?")
